2. In the Open field, type the following and then click OK (see Figure 4-5).
D:\Setup.exe
The D:\ indicates that the program to be executed can be found on a CD
in the CD drive. Your CD drive might be assigned a letter other than D so
be sure to check.
Figure 4-5: Running the setup command.
The AirNavigator configuration utility opens.
3. Select the Install Buffalo Client Manager radio button and click OK, as
shown in Figure 4-6.
Figure 4-6: I choose to install the Client Manager, which is this card’s connection utility.
The Client Manager Installer opens, prompting you to close other appli-
cations before continuing.
4. Click Next to open the EULA screen. Read the information (or at least
pretend to) and if you find nothing objectionable, click I Agree.
A screen indicating where the files are to be installed opens. You're
given the option of choosing another location -- but since you're too
smart to make that mistake, you simply . . .
5. Click Next, as shown in Figure 4-7.
Chapter 4: Putting Your Gear Together
Page 63
